Description

FOR BEST RESULTS:
• With a brush or spray, apply a generous coat of CORROTEC.
• For very severe cases e.g. in very harsh marine environments, 2 coats of CORROTEC are required.
• Allow to dry 2-4 hours before recoating with NEO Paints’ water or solvent based products.
• CORROTEC is ready for use un-thinned; thinning with water will reduce its hiding power and impair anti-corrosion protection.
• CORROTEC should never be mixed with other products.
• CORROTEC should never be used under two-pack solvent based products.

FEATURES:
• An anti-corrosive primer suitable for use in the Namibian environment.
• Excellent adhesion
• Can be over-coated with a range of NEO Paints’ water and solvent based products (1 and 2 pack systems including epoxies).
• A single pack type etch primer based on phenolic-PVB resin. The primer contains acid, which enhances the adhesion and brings about an exceptional hardness for this coating.