NEO Woodcoating Gloss

Description

FOR BEST RESULTS:
• Sand the wooden substrate well and remove all dust.
• New wood: Apply 1 coat of NEO Woodcoating diluted with approx 10% NEO Mineral Turpentine.
• Allow to dry 18-24 hours before sanding again. Remove all dust.
• Brush apply 2 more generous coats leaving 24 hours between coats.
• Existing varnished surfaces: If the substrate is in a good condition, sand well and apply 2 coats of NEO Woodcoating.
• Should the existing varnish coating be brittle, flaking, etc, remove completely. Apply a thick layer of NEO Paint Remover on the varnished surface.
• After 15-20 min, lift off the paint remover together with the old varnish, using a scraper.
• Rinse well with warm soapy water to remove all traces of the paint remover.
• When dry, sand well and apply 3 coats of NEO Woodcoating

FEATURES:
• Highly flexible wood varnish
• UV light, humidity and water resistance
• Ideal for any type of exterior wood work, but not suitable for floors