1. Apply “NEO Metal Conditioner” to metal by brushing well with stiff nylon brush.

2. Allow to react for 10 to 15 minutes and rinse with clean water by brushing down with stiff nylon brush.

3. Sand out any red rust back to clean metal. Within 1 hour after cleaning spot prime areas that were rusted with one coat “NEO Corroguard Primer” and let dry for 4 hours.

4. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

5. Apply two coats “NEO Roof Paint” or “NEO CoolRoof” and allow to dry 4 hours between coats.

1. Apply “NEO Metal Conditioner” to metal by brushing well with stiff nylon brush.

2. Allow to react for 10 to 15 minutes and rinse with clean water by brushing down with stiff nylon brush.

3. Sand out any red rust back to clean metal.

4. Within 1 hour after cleaning spot prime areas that were rusted with one coat “NEO Corrotec Primer” and let dry for 2 hours.

5. Apply one coat “NEO Corroguard Primer” over whole roof and allow to dry for 4 hours.

6. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

7. Apply two coats “NEO Roof Paint”

1. Remove dust and other contamination by brushing down with dry nylon brush.

2. Apply one coat “NEO Bonding Liquid” over whole roof and allow to dry for 4 hours (not to exceed 48 hours before painting).

3. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

4. Apply two coats “NEO Roof Paint” or “NEO CoolRoof” and allow to dry 4 hours between coats.

5. Apply by brush, Sheepskin / Corrogated Roller or airless spray

6. Cleaning Solvent use water

1. Remove dust and other contamination by brushing down with dry nylon brush.

2. Apply one coat “NEO Bonding Liquid” over whole roof and allow to dry for 4 hours (not to exceed 48 hours before painting).

3. Prime all nail Heads with “NEO Corrogurad Primer” and allow to dry for 4 hours.

4. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

5. Apply two coats “NEO Roof Paint” or “NEO CoolRoof” and allow to dry 4 hours between coats.

1. Apply “NEO Metal Conditioner” to metal by brushing well with stiff nylon brush.

2. Allow to react for 10 to 15 minutes and rinse with clean water by brushing down with stiff nylon brush.

3. Sand out any red rust back to clean metal. Within 1 hour after cleaning spot prime areas that were rusted with one coat “NEO Corroguard Primer” and let dry for 4 hours.

4. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

5. Apply two coats “NEO Roof Paint” or “NEO CoolRoof” and allow to dry 4 hours between coats.

1. Apply “NEO Metal Conditioner” to metal by brushing well with stiff nylon brush.

2. Allow to react for 10 to 15 minutes and rinse with clean water by brushing down with stiff nylon brush.

3. Sand out any red rust back to clean metal.

4. Within 1 hour after cleaning spot prime areas that were rusted with one coat “NEO Corrotec Primer” and let dry for 2 hours.

5. Apply one coat “NEO Corroguard Primer” over whole roof and allow to dry for 4 hours.

6. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

7. Apply two coats “NEO Roof Paint”

1. Remove dust, other contamination and chalking (powdery) paint by brushing down with nylon brush and copious amounts of clean water and let dry completely.

2. Remove blistering and peeling paint by scraper. Apply one coat “NEO Bonding Liquid” over whole roof and allow to dry for 4 hours (not to exceed 48 hours before painting).

3. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

4. Apply two coats “NEO Roof Paint” or “NEO CoolRoof” and allow to dry 4 hours between coats.

5. Apply by brush,Sheepskin / 5. Corrogated Roller or airless spray

6. Cleaning Solvent use water

1. Remove dust, other contamination and chalking (powdery) paint by brushing down with nylon brush and copious amounts of clean water and let dry completely.

2. Remove blistering and peeling paint by scraper.

3. Apply one coat “NEO Bonding Liquid” over whole roof and allow to dry for 4 hours (not to exceed 48 hours before painting).

4. Prime all nail Heads with “NEO Corrogurad Primer” and allow to dry for 4 hours.

5. Seal all nail heads and flashing over-laps with 3 coats “NEO Elastic Water Proofing” allowing each layer to dry for 4 hours (larger gaps use in conjunction with membrane).

6. Apply two coats “NEO Roof Paint” or “NEO CoolRoof” and allow to dry 4 hours between coats.                                                                                                                        

7. Apply by brush,Sheepskin / Corrogated Roller or airless spray

8. Cleaning Solvent use water

1. Remove dust, other contamination and chalking (powdery) paint by brushing down with nylon brush and copious amounts of clean water and let dry completely.

2. Spot prime all nailheads with “NEO Corrotec Primer” and allow to dry for 2 hours.

3. Apply one coat “NEO Bitumen Black” over whole roof and allow to dry for 4 hours.

4. Apply two coats “NEO Bitumen Aluminium” and allow to dry 4 hours between coats.                                                                                                                                        

5. Apply by brush, Mohair Roller or airless spray                  

6. Cleaning Solvent for:

    a. NEO Corrotec Primer use NEO M-Thinner

    b. Bitumen Black / Aluminium use NEO Mineral Turpentine